撫州黎川南豐縣殼牌3號潤滑脂-壓縮機油直營啦1、2號和3號是只是它的NKGI號數，也就是針入度，2號在265-295，最常用，3號的在220-250，較硬，一般用于要求具有抗水或抗固體雜質污染的應用中，減少設備磨損。 2、3#硬一點，多用手工涂抹，2#稍微軟硬點，多用機器加注、也可手工涂抹。使用性能無區別。 3、根據NLGI分類，錐入度（針入度），潤滑脂從#000到#6，數字越大，潤滑脂越硬。#2為常用潤滑，#3用于載荷較重或立式電機軸承的潤滑。 4、濃稠度不一樣也就是針口度，濃度高用于低速電機比如6,8級電機一般用3號，濃度低用于高速電機一般2號1、No.1, No.2 and No.3 are just its NLGI numbers, which is penetration, No.2 at 25-295, most commonly used, No.3 at 220-250, harder, generally used for applications requiring resistance to water or solid impurity, to reduce equipment wear. 2、No.3# is harder, more often used for manual application, No.2 slightly softer harder, more often used for machine, can also be applied manually. There is no difference in performance. 3、According to the NLGI classification, penetration (penetration), lubricating grease from000 to #6, the larger the number, the harder the lubricating grease. No.2 is commonly used lubrication, No.3 is used for heavier load vertical motor bearings lubrication. 4、The consistency is different, that is, the needle mouth degree, the high concentration is used for low-speed motors such as ,8-grade motors, generally 3#, the low concentration is used for high-speed motors, generally 2#.