紹興市越城區柯橋美孚液壓油-潤滑脂2號經銷Viscosity: Lubricating grease No.2 has lower viscosity, suitable for low temperature and high-speed operation equipment. Lubating grease No.3 has higher viscosity, suitable for high temperature and heavy load operation equipment. Anti-oxidation performance: Lubricating grease No. usually has better anti-oxidation performance, which can maintain stable lubrication performance in high temperature environment. The anti-oxidation performance of lubricating grease No.2 relatively worse. High temperature resistance: Lubricating grease No.3 usually has higher high temperature resistance, which can maintain lubrication effect under high temperature conditions. Lricating grease No.2 may lose lubrication performance at high temperature1. The dropping point temperature of lubricating grease No.3 is higher than that of No.24 Application: Lubricating grease No.2 is suitable for low temperature and high-speed operation equipment, such as motor bearings, fans, etc. Lubric grease No.3 is suitable for high temperature and heavy load operation equipment, such as bearings, gears, etc.1. Lubricating grease No.3 is generally used applications requiring resistance to water or pollution by solid impurities to reduce equipment wear2. Hardness: The cone penetration of lubricating grease No.2 is between 26-295, which is softer. The cone penetration of lubricating grease No.3 is between 220-250, which is harder