麗水青田縉云縣美孚100齒輪油-潤(rùn)滑脂1號(hào)銷(xiāo)售Mobilgear 600 XP series is an ultra-high performance gear oil, with excellent characteristics for withstanding extreme and loads, for use in a wide range of enclosed gear drives using circulating or splash lubrication.. The Mobilgear 600 XP series is designed to meet the needs of gearbox technology. Gearbox design technology tends to use smaller gearbox units to achieve similar power outputs. Increased power density puts greater demands on the gear oil. Theilgear 600 XP series formulation meets these demands by providing additional protection for the gears, bearings and seals. The Mobilgear 600 XP series protects against gear tooth pitting, which can lead to severe tooth damage. The Mobilgear 600 XP series exceeds industry requirements for bearing wear protection. In fact, wear protection provided by the Mobilgear 600 XP series is equivalent to 15 times that of the industrial standard FAG FE8 test. The balanced formulation of Mobilgear 600 XP series provides maximum anti-wear and anti-corrosive protection while remaining compatible with commonly used gearbox seal materials. Mobilgear 00 XP helps maintain gearbox seals in good condition, thereby preventing leaks and avoiding contamination. By protecting the gears, bearings and seals, Mobilgear 600 XP improve equipment reliability and increase productivity. Mobilgear 600 XP series oils are recommended for enclosed industrial spur, helical and bevel gear drives using circulating or lubrication, where the overall oil temperature can reach 100oC. They are particularly suitable for gear units operating under high load or shock load conditions. Mobilgear600 XP oils are also extensively used in marine gear drives. They can also be used in non-gear applications, including high-load and low-speed sliding and rolling bearings