聯系人： 李 小姐
公司：深圳前海眾合恒達科技有限公司
地址：深圳市前海深港合作區前灣一路1號A棟201室
電話：
QQ：
美國WATTEREDGE VCM,STANDARD,SS,POTTED,BOXED,INSPECTED WX33300
WX-33300 Rated 6.25kA, uses same contact material as WX but is constructed of epoxycoated stainless steel support plates. Used in metals refining applications where switch will be operated in a NO LOAD, i.e. power source turned off before opening, installation. Normally ceramic and diaphragm region is urethane-potted to reduce corrosive activity on metal component
美國WATTEREDGE WX-32823
WX-32823 "Standard" VCM, Rated 6.25kA. Support Plates constructed of Epoxy-Coated Cold Rolled Steel. This VCM has been the primary workhorse of Watteredge, Inc. switches, normally used in all Chlor-alkali mercury cell "fixed" switches, and most other non-metals refining applications. Proprietary alloy of contact material allows for 6.25kA rating vs. 5.0kA rating for most other VCM designs.
美國WATTEREDGE WX-34777
WX-34777 Rated 5.0kA, commonly referred to as a "High Energy" VCM. Contact material utilizes a proprietary alloy to offer good electrical conductivity, but to also limit the effects of high-energy arcing, normally experienced in ON LOAD opening in highlyinductive copper-refining bus systems. Support plates constructed of epoxy-coated stainless steel. Ceramic and diaphragm region urethane-potted to resist corrosive metal-refining environment.
美國WATTEREDGE WX-34778
WX-34778 Rated 5.0kA, same as WX-34777 but support plates are epoxy-coated cold rolled steel. Normally not potted. This VCM is solely for use in Watteredge, Inc. Matrix Portable Jumper Switch elements. The switch element is water cooled, allowing this VCM to carry between 7.0 and 12.5kA. The high energy contact material prolongs the life of the VCM as it operates in Matrix Jumper Switch assemblies shorting and opening on currents from 65kA to 170kA. The Watteredge, Inc. Matrix switch designates anywhere from one to four of these VCM's to be in the "sacrificial" position (one of the last contacts to open, taking the brunt of the electrical arc energy). Normally these contacts are changed out once every switch operations at full load (about 1 year of operation in a typical Chlor-alkali plant). Investigation of the contact faces after 300 + operations at full load has shown very acceptable performing as designed and expected.
美國WATTEREDGE MOD ARCING CONTACT ASSEMBLY, MODIFIED
深圳前海眾合恒達科技有限公司主營進口產品業務，主要行業涵蓋油田，鉆井，海事，工礦，煤炭，工業工程機械等等！主要經營品牌產品：National Oilwell Varco國民油井，VARCO華高頂驅配件，Val-Tex沃泰斯閥門養護，RS Clare密封脂，JET-LUBE潤滑油，OTECO閘閥，MD Totco馬丁戴克儀器儀表， DERRICK德瑞克振動篩配件，VIGIL防滑貼， MI SWACO振動篩配件，AUTRONICA煙感探頭，LEWIS井架安全帶， TESCO頂驅配件，ORGA奧爾加航空導航燈具，SCHMITZ施邁斯清潔球，CAMERON NUFLO流量計，EDD流量計， NOV MISSION米森泵，挪威RESTECH PLT拋繩器, 丹麥KEFOITT科奧菲取樣閥，EATON MEDC報警器，RIDGID里奇工具等等！
