品牌：RETZ瑞茨/我們一直致力于流體控制和測控領域的持續創新，始于2005……
進口電動高壓球閥主要零部件經過專業廠家鍛制，克服了鑄鋼閥門潛在的缺陷，,在工作壓力下能夠保持其結構的抗壓均勻性。適用介質： 水、油、氣等非腐蝕性介質和酸堿腐蝕性介質
retz The main components of imported electric high-pressure ball valves have been forged by professional manufacturers, overcoming the potential defects of cast steel valves and maintaining their structural compressive uniformity under maximum working pressure. Applicable media: Non corrosive media such as water, oil, gas, and acid alkali corrosive media
功能介紹 Function introduction
進口電動高壓球閥是由鍛鋼高壓閥體及電子式角行程電動執行器組成。電動執行器采用一體式結構，輸入220V電源即可直接進行開關量調節，亦可內置伺服模塊，輸入控制信號(4～20mADC或1～5VDC)及單相電源即可控制運轉 retz The electric high-pressure ball valve is composed of forged steel high-pressure valve body and electronic angular stroke electric actuator. The electric actuator adopts an integrated structure. It can directly adjust the switching value by inputting 220V power supply. It can also be equipped with a servo module. It can control the operation by inputting control signal (4~20mADC or 1~5VDC) and single-phase power supply
設計特色 Design features
采用高壓鍛造，克服了鑄造的缺陷 High pressure forging is adopted to overcome casting defects
結構簡單、體積小、重量輕 Simple structure, small size and light weight
任意方向方莊、雙向密封 Fangzhuang in any direction, two-way sealing
閥體可做多種結構（螺紋，焊接，法蘭）The valve body can be made of various structures (thread, welding, flange)
可用于帶懸浮狀顆粒的介質 Can be used for medium with suspended particles
進口電動高壓球閥主要技術參數及性能 Main technical parameters and performance
公稱通徑 DN(mm) 15 20 25 32 40 50 65 80 100 125 150 200 250 300
允許壓差(MPa) ≤ 公稱壓力
閥體形式 整體式，二段式鍛造閥體，三段式鍛造閥體
公稱壓力 PN16、25MPa、32MPa；ANSI 150、300、600、900、1500LB
連接形式 法蘭式、焊接式、螺紋式
密封填料 V型聚四氟乙烯填料、柔性石墨填料等
閥芯形式 O型球體閥芯
流量特性 近似快開特性
動作范圍 0～90°、0～360°
泄露量Q 按GB/T4213-92，小于額定KV0.01%
基本誤差 ±1%
回差 ±1%
死區 ≤1%(可調)
可調范圍 250：1 350：1
配置執行機構 角行程電動執行機構
控制方式 開關到位燈(開關兩位控制)、無源觸點信號、1/5K電位計、智能調節(4～20mA模擬量信號控制)
執行器技術參數 Technical parameters of actuator
電源電壓 AC220/380V，50/60Hz
輸出力矩 50N•M～2000N•M
動作范圍 0～90° 0～360°
