宿遷沭陽縣泗陽美孚傳動油-透平油銷售處透平油也稱TSA汽輪機油，按照ISO黏度等級分為32、46、68、100幾個等級，其密度一般都是按照實測值計算，隨著汽輪機油的運動黏度的變化而發生變化，您如果是搞化工應該理解汽輪機油主要考核運動黏度指標,動力黏度/密度=運動黏度,汽輪機油的大致密度范圍在0.9~0.91之間 補充:要是HC類基礎油，密度大概是.83~.85之間 1.汽輪機油普通汽輪機油用于發電廠、船舶和其它工業的蒸汽輪機、水力輪機、發電機軸承等機械設備中的潤滑系統。 2.防銹汽輪機油發電廠設備專用油，也可做為船舶和其它工業的汽輪機組、水輪機組的潤滑與密封�？勺鰹樾璨缓�硫化物介質的壓縮機、液壓傳動等設備用油。使用的環境溫度應不低于0℃。 3.抗氨汽輪機油適用于大型合成氨化肥裝置的離心式合成壓縮機、冰機及汽輪機組的潤滑與密封，工作條件溫度在50-55℃，環境濕度在-10-50℃，其中32D可在-20-50℃下使用Turbine oil, also known as Turbine oil, is divided into several grades such as 32, 46,68, and 100 according to ISO viscosity grades. Its density is generally calculated based on the measured value and changes with the change of the dynamic viscosity of turbine oil If you are in the chemical industry, you should understand that the main indicator of turbine oil is the dynamic viscosity index, dynamic viscosity/density = dynamic viscosity. The density range of oil is between 0.9 and 0.91. Supplement: if it is HC base oil, the density is about 0.83 to 0.5. 1. Ordinary turbine oil is used for the lubrication system of steam turbines, hydraulic turbines, and generator bearings in power plants, ships, and industries