黃石西塞山下陸區美孚2號潤滑脂-導軌油銷售潤滑脂2號和3號有何區別? 1、就是軟硬的區別。2號和3號是只是它的NKGI號數，也就是針入度，2號在265-295，最常用，3號的在220-250，較硬，一般用于要求具有抗水或抗固體雜質污染的應用中，減少設備磨損。3#硬一點，多用手工涂抹，2#稍微軟硬點，多用機器加注、也可手工涂抹。使用性能無區別。 2、在比較鋰基潤滑脂2號和3號的區別時，我們發現兩者在多個方面存在差異。首先，它們的錐入度有所不同。2號和3號代表了潤滑脂的NLGI號數，也就是錐入度。根據NLGI的標準，潤滑脂從000#到6#共有九種牌號，牌號數字越大，潤滑脂的硬度也越大。 3、潤滑脂1號、2號、3號的主要區別在于其粘度等級、使用溫度范圍以及應用場合的不同。首先，從粘度等級上來看，1號、2號、3號潤滑脂分別代表了不同的粘度級別。潤滑脂的粘度是衡量其抵抗剪切力的能力，也就是它的流動性如何。通常情況下，數字越大，粘度越高What is the difference between grease No.2 and No.3? 1. It's the difference in hardness. No.2 No.3 are just their NLGI numbers, which is the penetration, No.2 is between 265-295, the most commonly used, No. is between 220-250, harder, generally used in applications requiring resistance to water or solid impurities, to reduce equipment wear. No.3 is harder and often used for manual application, No.2 is slightly softer and harder and is often used for machine filling and can also be applied manually. There is no difference in performance. 2. When comparing lithium-based greases No.2 and No.3, we find that there are differences between the two in several aspects. First, their cone penetration is. No.2 and No.3 represent the NLGI number of the grease, which is the cone penetration. According to the NLGI standard, there are nine grades of grease 000# to 6#, the larger the grade number, the harder the grease